Fence washing uses a pressure and chemical mix matched to the material — wood needs low pressure and a longer chemical dwell time since pressure alone can't do the work, vinyl can crack under a direct blast, and aluminum or chain-link tolerate more force. Fort Lauderdale Pressure Washing matches the method to the fence before starting.
A fence gets pressure-washed the wrong way exactly once — after that, it's a repair job instead of a cleaning job. Wood fibers lift and gray under a direct blast, vinyl panels spiderweb at the seams, and a rental machine set to driveway pressure will strip a picket or privacy fence in a single pass, because the settings were built for concrete, not softwood or PVC. The fix isn't less water — it's the right combination of low pressure, the correct chemical, and enough dwell time to let the solution do the work pressure alone shouldn't.
Fort Lauderdale Pressure Washing treats fence washing as its own service instead of folding it into a house wash, because the settings for a wood privacy fence, a vinyl panel fence, and an aluminum or chain-link fence aren't the same job with a different nozzle.
Does wood need different treatment than vinyl or aluminum fencing?
Wood gets the softest approach: low pressure, a cleaning solution built for mildew and algae, and enough dwell time to lift the stain without driving water into the grain. Vinyl tolerates more pressure than wood but far less than concrete — held too close or angled into a seam, it can crack a panel or blow out a cap rail. Aluminum and chain-link are the forgiving ones; they take a stronger rinse without the same risk, which is why treating a whole yard at one setting usually means the wood or vinyl sections came out under-cleaned or damaged.
How often does a fence need to be washed again?
Algae and mildew come back fastest on the shaded side of a fence and on any panel that sits under sprinkler overspray or heavy landscaping — those sections need a repeat wash well before the sun-exposed stretch of the same fence shows anything. A fence that gets full sun most of the day holds its clean look far longer than one boxed in by shade.
A fence that's already gray, splitting, or soft at the base is past what washing can fix. At that point the wood has broken down structurally, and pressure or chemical treatment won't restore fiber that's already gone — that's a replacement conversation, not a cleaning one.
Will pressure washing damage my wood fence?
Not if the pressure and chemical are matched to wood — low pressure with a longer chemical dwell time removes algae without lifting the grain. Damage happens when a fence gets the same treatment as a driveway or pool deck, which is too much direct force for a softer material.
Do you wash fences outside Fort Lauderdale, like Coconut Creek?
Yes — fence washing covers Fort Lauderdale and roughly 20 surrounding communities, Coconut Creek included. Reach out to Fort Lauderdale Pressure Washing to confirm coverage for a specific address before booking.
Do you clean vinyl fences the same way as wood?
No. Vinyl takes more pressure than wood, but it's not treated like concrete either — too much force angled into a seam can crack a panel or pop a cap rail loose, so the pressure gets dialed back from what's used on a driveway.