Driveway cleaning uses high-pressure equipment with a rotating surface-cleaner attachment to strip oil, rust, and tire residue off concrete or pavers evenly, without the streaking a hand-held wand leaves behind. Fort Lauderdale Pressure Washing, serving 20 communities around Fort Lauderdale, treats driveways as a full-PSI job — the opposite end of the pressure scale from its soft-wash services.
Rust rings from sprinkler heads, black tire marks at the tire line, and oil spots where a car sits are the three stains that show up on almost every driveway call, and each needs a slightly different approach before the surface cleaner ever touches the ground. Oil needs a degreaser dwell time before rinsing; rust from irrigation systems needs a cleaner that won't etch the concrete; tire marks usually lift with straight pressure and the right nozzle angle.
A rotating surface-cleaner attachment — a wide, flat head that spins under a hood instead of a single wand jet — is what keeps the finish even across a full slab. A hand-held wand alone tends to leave overlap lines and lighter and darker stripes, which is the most common complaint about a DIY driveway wash.
Will pressure washing damage pavers or stamped concrete?
Poured concrete usually takes full pressure without much thought, but interlocking pavers are a different case — too much PSI blasts the joint sand out from between them, which can leave pavers loose or shifting underfoot. The crew drops pressure and adjusts the surface-cleaner height on paver driveways specifically to protect that joint sand, and will point out joints that need re-sanding rather than blast past them.
Does a clean driveway actually matter before selling a house?
A driveway is the first surface a buyer or appraiser walks across, and oil stains or rust rings read as deferred maintenance even if nothing else is wrong with the house. It's one of the few pressure-washing jobs that pays for itself in first impressions rather than in protecting a surface from damage.
Can you get old oil stains all the way out?
Fresh oil comes out fully with degreaser and dwell time; oil that's sat for months or years may lighten significantly but not disappear completely, since it's had time to soak into the concrete's pores. The crew will say upfront if a stain looks like a partial-improvement case rather than promise full removal.
Will pressure washing hurt my pavers?
Standard driveway-strength pressure is safe for poured concrete but gets adjusted down for interlocking pavers to protect the joint sand between them. That's the main risk with pavers specifically, not concrete.
How often does a Fort Lauderdale driveway need this?
There's no fixed schedule — driveways that stay shaded or sit near sprinklers need it more often than ones in full sun, since shade and standing water are what feed the staining in the first place.